Plumbing

Water Leak Detection and Repair

A rising water bill, a warm spot on the floor, or a stain on the ceiling usually means water is escaping somewhere you cannot see. We locate leaks with pressure testing, acoustic listening, and thermal imaging so the repair opens as little wall, slab, or ceiling as possible.

Leaks we repair

Most leaks fall into a handful of categories, and each has a very different repair path.

  • Slab and under-floor supply leaks
  • Copper pinhole leaks and failed solder joints
  • PEX fitting and manifold leaks
  • Supply line and angle stop leaks under sinks and toilets
  • Hose bib, main shutoff, and pressure regulator leaks
  • Shower pan and tub valve leaks

How we locate the leak

We isolate the system section by section with pressure gauges, then confirm the location acoustically or thermally before cutting anything. You get photos of the findings and a fixed price for the repair before work starts.

Repair versus repipe

One pinhole in copper is often a repair. A third pinhole in the same run usually means the pipe wall is failing throughout, and a partial or whole-home repipe costs less over time than repeated call-backs. We will tell you honestly which situation you are in.

Frequently asked questions

How do I know if I have a hidden leak?

Shut off every fixture and watch the low-flow indicator on your water meter. If it moves, water is leaving the system somewhere between the meter and your fixtures.

Should I shut the water off before you arrive?

If water is actively running or damaging finishes, yes — close the main shutoff at the meter or where the line enters the house, then call us.

Speak with a technician

Ready to get it done right?

Request an appointment or call and speak with a licensed technician.

Call Now